Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Re: Mearuring crosstalk for adjusting azimuth posted by Rob Thomas on July 17, 2002 at 17:00:54:
Hi,I tried that, but the results were not so good. See the following post.
http://www.audioasylum.com/audio/vinyl/messages/73925.html
The problem is that the leaked signal at the phono preamp output should ideally be only a few mV, so you would need a screened cable to connect from the phono output to the meter, otherwise the voltages will be hidden in RFI.
I agree that it is not a perfect method.
Best regards,
Brian
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Mearuring crosstalk for adjusting azimuth - bkearns 06:04:00 07/18/02 (1)
- I'll stick with readings at the speaker terminals then. (nt) - Rob Thomas 15:42:33 07/18/02 (0)