Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Glued a quarter onto a piece of PVC conduit. posted by ghost of olddude55 on June 29, 2020 at 16:07:15:
I think I may have been the first poster here to mention using this material some years ago. I got the idea from a dealer who got it from the Expert Stylus Company.
I just squished a tiny ball of it onto the plastic alignment template for my SME V. Any piece of thin plastic like an old credit or similar card would do.
I can save you money over ghost's method. Use a penny! the amount you need to use is very small. and only the stylus tip will penetrate the Bergeon given normal VTF.
I am still using the same piece I started with originally but admit my regular (e.g. each side) stylus maintenance is with a carbon fibre stylus brush. The Bergeon does not dry out significantly and the amount you get in the pack is a lifetime's supply.
"We need less, but better" - Dieter Rams
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Glued a quarter onto a piece of PVC conduit. - PAR 00:53:37 06/30/20 (0)