RE: Stylus jumps at beginning of 12 inch record

Posted by PAR on July 14, 2017 at 17:21:12

In Reply to: Stylus jumps at beginning of 12 inch record posted by Tompete123 on July 14, 2017 at 14:34:22:

Here I go again given how many times that I have answered similar questions on various forums! Nearly all regular jumping at the same point on a record's radius is caused by the arm not disengaging properly from the lift/lower device when lowered. So it isn't disengaged for the outer part of a 12 " record but by the time it moves inwards to the outer radius of 10 " or 7" discs it is. Look at this.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Stylus jumps at beginning of 12 inch record - Tompete123 14:34:22 07/14/17 (6)

RE: Stylus jumps at beginning of 12 inch record - John Elison 18:50:46 07/14/17 (1)

John is probably right - Batman 09:39:47 07/15/17 (0)

RE: Stylus jumps at beginning of 12 inch record - PAR 17:21:12 07/14/17 (2)

RE: Agreed - mr.bear 09:53:09 07/15/17 (1)

Good pointers on degrease and re-grease. Thanks. nt - alaskahiatt 10:40:02 07/15/17 (0)

RE: Stylus jumps - hifitommy 15:26:36 07/14/17 (0)

Follow Ups

RE: Stylus jumps at beginning of 12 inch record - PAR 17:21:12 07/14/17 (2)

RE: Agreed - mr.bear 09:53:09 07/15/17 (1)

Good pointers on degrease and re-grease. Thanks. nt - alaskahiatt 10:40:02 07/15/17 (0)

RE: Stylus jumps at beginning of 12 inch record

Post a Message!