RE: Some test records comparisons

Posted by Thomas_A (A) on July 11, 2017 at 05:50:57

In Reply to: RE: Some test records comparisons posted by flood2 on July 11, 2017 at 02:15:06:

Thanks, interesting as well. What is the slope in dB from 1 to 10 kHz? The unusual load that was tested to get a target response of ca +/- 0.5 dB between 1-10 kHz, and the drawback is the sloping response above 13-14 kHz.

To use the pink noise, I export the values from a FFT and then convert to "linear" by adding 3 dB per octave. Formula from 1000 Hz: dBcorrected=dBmeasured+3*ln(fmeasured/1000)/ln2

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Some test records comparisons - Thomas_A 00:50:39 07/09/17 (8)

RE: Some test records comparisons - flood2 02:15:06 07/11/17 (5)

RE: Some test records comparisons - Ugly 09:30:03 07/11/17 (2)

RE: Some test records comparisons - flood2 16:29:57 07/11/17 (1)

RE: Some test records comparisons - Ugly 19:40:10 07/11/17 (0)

RE: Some test records comparisons - Thomas_A 05:50:57 07/11/17 (1)

RE: Some test records comparisons - flood2 16:54:37 07/11/17 (0)

RE: Some test records comparisons - tketcham 18:59:51 07/10/17 (1)

RE: Some test records comparisons - Thomas_A 01:10:42 07/11/17 (0)

Follow Ups

RE: Some test records comparisons - Thomas_A 05:50:57 07/11/17 (1)

RE: Some test records comparisons - flood2 16:54:37 07/11/17 (0)

RE: Some test records comparisons

Post a Message!