Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: External L-pad Connections posted by Duster on June 11, 2017 at 15:54:10:
I use an actual L-pad to balance out the speaker, then measure the values required, them build composite resistors (as the exact values required are never available).
Use the closet (larger) value, and parallel it with a value about 10x larger to trim it down to the exact value required (as measured).
I find the driver levels need to be matched within ±0.25dB, and standard values won't get you there.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: External L-pad Connections - djk 15:29:07 06/12/17 (0)