Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Public Service Anouncement! posted by Audiolover718 on May 21, 2011 at 06:09:22:
@Audiolover718- I have recently replaced the 4 internal rail fuses of my Parasound Halo A-21 amplifier with Furutech fuses. The result is really good and it matches with everything that you said about the clarity, the depth and height of the soundstage. Although the clarity improved significantly but the treble sounds a little metallic and harsh which I don't like. The amplifier has had around 300 hrs of running after I replaced the fuses.
Did you have similar experience?
I am a little confused by your explanation of how to find out the orientation of the current flow by looking at the word Furutech on the fuse. If you are saying that the printing is read properly in conjunction with the signal flow then I would assume that current flow is from F to H. If this is true, I would put F side on the fuse holder and H side which goes inside the machine if the fuse is inserted at the back of the equipment. This orientation will match the current flow from the wall receptacle to the equipment. Could you please clarify this orientation doubt?
Thanking you in advance.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Public Service Anouncement! - indranilsen69@gmail.com 10:56:52 03/03/17 (0)