|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: forgot to mention posted by madisonears on February 11, 2017 at 20:36:32:
Yes it bothered me that, due to available space and lead spacing, i could not secure the caps tightly against the board (the Arcotronic caps were also floating in the air, btw). That said, the leads are really thick and strong.
I thought about wrapping the caps tightly in Teflon tape but I should have done it prior to soldering them :( also part of me didn't want to hide the beautiful metal body :/ wrapping things up in teflon tape looks tweaky as hell ^^
I also thought about compressing a piece of sorbothane under each cap, but I'm afraid the sorbothane might react with the board material or with the cap's body, I don't see it as an endlessly stable material. I'll figure something out.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: forgot to mention - KanedaK 02:50:20 02/12/17 (2)
- RE: forgot to mention - Tweaker456 11:44:20 02/12/17 (0)
- RE: forgot to mention - bcowen 05:50:18 02/12/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
