Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: Tube emitting tone posted by Jack G on October 3, 2021 at 13:45:08:
For tubes OTHER than ouput, which I suspect tend to run hotter, you don't need a brand name.
Find a place that sells Orings.....online will do.
Buy a high-temp o-ring. Red Silicon is goo to hotter than low level tubes will get......
you'll need diameter.....which can be gotten with a PIECE OF STRING and a ruler......easy calcuation involving PI.
I linked a SQUARE cross section ring, which should have MORE bearing area on the tube.
It comes in BUNA and SILICON......The Silicon is GOOD to over 400f.......
Too much is never enough
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Tube emitting tone - pictureguy 14:42:47 10/03/21 (2)
- O rings - Uncle Mike 15:52:01 10/03/21 (1)
- RE: O rings - pictureguy 19:28:22 10/03/21 (0)