Tubes Asylum Questions about tubes and gear that glows. FAQ

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tubes Asylum ]

---

[ Alert Moderator ]

---

RE: Using a 6N6P in place of a 6DJ8?

Posted by zacster (A) on March 10, 2017 at 17:08:48

In Reply to: Using a 6N6P in place of a 6DJ8? posted by zacster on March 5, 2017 at 16:16:29:

I bought a pair from Ukraine. I'll see first how long it takes to get here in the US, and then how they sound and report back.

IF they work in the existing layout, and a big IF, then I'll try to transformer couple them with LL1692A transformers. If they don't in the existing circuit I'll build something else to make them work. I'll use the Amity schematic as a guide.

And while I'm at it, I'll see if I can eliminate the last bit of hum, one channel only. It is probably wires crossing or something like that. The other side is quiet but of course they aren't quite mirror images. I haven't opened up this amp in years but in the interim have read up on grounding schemes and hum and applied it to my phono pre and killed all additional hum.

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---