Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Cable Asylum ]

---

[ Alert Moderator ]

---

RE: neither

Posted by reagan (A) on March 6, 2021 at 05:42:36

In Reply to: neither posted by madisonears on March 5, 2021 at 17:59:47:

Per Jon Risch...
For XLR to XLR, twisted pairs should be constructed like this:
pin 2 to pin 2, pin 3 to pin 3 for the twisted pair wires, THEN, the shield to pin 1 of the source component. This SHOULD work for true balanced gear, but some is not true balanced, and a ground reference connection must be made, in this case, wrap a 16 gauge tinned stranded hookup wire around the OUTSIDE of the shield braid, and connect to pin 1 at both ends. This will help keep any ground currents from interfering with the two differential pairs, and minimize cable capacitance.

This post is made possible by the generous support of people like you and our sponsors:

Amplified Parts

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---