RE: How is that possible?

Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

Posted by Tony Lauck (A) on May 18, 2012 at 11:44:25

In Reply to: RE: How is that possible? posted by milpai on May 18, 2012 at 10:48:06:

"But if CDP has only RCA (or lets say 2V both on RCA and XLR), I don't think the TVC will give out more voltage to amp thru XLR. It will put out the same voltage as it would do through RCA.

As I said before, it depends on the circuits involved. There are various ways of building products with two output connectors and there are various ways of building products with two input connectors. There is no way to use pure logic to deduce what will happen, as there are various possible implementations that can produce different results. One has to know how the particular circuit works.

If you want to know how a particular box handles its RCA and XLR inputs or outputs it will probably be necessary to open up the box and trace the wiring, but it is possible that the user or maintenance documentation will provide the necessary information. Or, you can just measure the device.

Tony Lauck

"Diversity is the law of nature; no two entities in this universe are uniform." - P.R. Sarkar

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Need RCA - to - XLR - Advice - erik 05:10:54 05/09/12 (16)

RE: Need RCA - to - XLR - Advice - josephelias417@gmail.com 17:35:00 12/10/12 (0)

RE: Need RCA - to - XLR - Advice - Dynobot 12:07:56 05/11/12 (0)

RE: Need RCA - to - XLR - Advice - Lord Soth 07:17:45 05/11/12 (0)

Thanks everybody! - erik 06:14:38 05/11/12 (0)

RE: Need RCA - to - XLR - Advice - Cycler2 14:30:53 05/10/12 (0)

RE: Need RCA - to - XLR - Advice - SgreenP@MSN.com 09:26:19 05/09/12 (10)

RE: Need RCA - to - XLR - Advice - erik 10:19:23 05/09/12 (9)

Be aware of possible gain issues. - Tony Lauck 13:09:58 05/09/12 (8)

How is that possible? - milpai 13:54:01 05/16/12 (4)

RE: How is that possible? - Tony Lauck 16:26:43 05/16/12 (3)

RE: How is that possible? - milpai 10:48:06 05/18/12 (2)

RE: How is that possible? - Tony Lauck 11:44:25 05/18/12 (1)

RE: How is that possible? - milpai 20:22:55 10/25/12 (0)

RE: Be aware of possible gain issues. - roscoeiii 08:29:23 05/10/12 (1)

Transformers are the best way to go... - mitch2 17:49:44 05/10/12 (0)

Never thought of that... - erik 17:34:48 05/09/12 (0)

Follow Ups

RE: How is that possible? - Tony Lauck 11:44:25 05/18/12 (1)

RE: How is that possible? - milpai 20:22:55 10/25/12 (0)

Post a Message!