 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: Some clarifications posted by sboje on January 07, 2001 at 17:09:50:
If you are running in I2S direct mode. The second light should be solid green. That is 3 green all the time. I have never encounter any setting with orange light on. It is either 2 green indicating 96K or 3 green indicating I2S direct. The P3A manual has the programming indicator stated clearly.Paul Lam
P.L.C.Lam Consulting Inc.
Follow Ups:
I thought the second light was supposed to indicate INPUT sampling rate.When I'm in I2S direct mode, my second LED is solid orange indicating 48kHz and my third LED is green indicating I2S direct. If I take the P-3A out of I2S direct mode, the second LED is solid green indicating 96kHz. This LED is green independent of the selected output bitrate on the P-1A.
In addition, If I select and output sample rate of 44.1kHz on the P-1A, I do not get any sound at all.
At this point, I'm not really concerned. I'm confident that Perpetual will either figure out what I'm doing wrong or figure what else may be happening.
I'm excited about getting this stuff working, adding the monolithic PS, and moving on to my next experiment.
- Charlie
Have you tried to set the P1A output sampling to 96K and press and hold the program button on the P3A until all 3 lights are green?Paul Lam
P.L.C.Lam Consulting Inc.
Many times. Anytime I put the P-3A into I2S direct mode by holding the program button on the P-3A until the third LED turns green, the second LED ALWAYS turns orange and stays that way. This is the case no matter what output sampling rate I set the P-1A to deliver.- Charlie
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
