|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
70.161.13.161
Hey Bob (or anyone else that can help)I want to try out a pro amp on my home speakers, Magnepan MMG planars. My local Guitar Center has plenty of QSC amps in stock; I have a question regarding two different models.
What's the main difference between the RMX1450, compared to the PLX1804, as used in my application? Obviously the salesman at the store recommends the more pricier model, that's Ok if there will be a real preceived difference.
Thanks for a reply,
John
Follow Ups:
The RMX series is entry-level. Conventional power supply, noisier fan.The PLX2 series is higher-level. Switch-mode power supply, lower noise and distortion.
Hi Bob,
I just picked up a rmx 1450. It is very nice, drives my MMGs very nicely... The only thing I cannot live with is the fan noise. Is there a way to change that? WHat do I need to know to about the stock fan to find a replacement? Is it really bad if I actually take it out? I run my MMGs at levels that are not very demanding on the amp. Many thanks in advance for your advices.
I might have a free solution. Where are you located, and can you give me the first four digits of the amp's serial number?
I'll see if I can give one of those PLX2s a try!
I have had some (good and bad) experiences with home to pro level matching, so I know what to expect. As far as the fan noise, I have the option of placing the amp in an adjoining closet, or taking on one of the "fan mods" that others have done to their home-based pro amps, to reduce noise.Is it true that the pro amps using the older conventional class "A/B" design would actually be better (cleaner) than the newer class "H" types, in my case? Read somewhere that the latter may be more acceptable to RF nasties.
This amp is going to sit on a stand, and go nowhere, so weight is not an issue.
> Is it true that the pro amps using the older conventional class "A/B" design would actually be better (cleaner) than the newer class "H" types, in my case? Read somewhere that the latter may be more acceptable to RF nasties. <In most class H applications, it is just a higher-efficiency version of class AB. So my answers would be "not true" and "what you read is wrong."
A pro amp is gonna be noisey manIf you like the sound of a cooling fan running in the backround
while your trying to enjoy something at a lower level in your
living room then have at it
There's always the Crown K1 and K2.
No fan.
Tom
a really good deal on a used one.For that much $$$ new, I can get one of those audiophool amps. (Actually already have one, an excellant Aragon 8008BB)
Any one of these used amps on this page will out do most any pro amp
in sonic quality for home useLink below
I have purchased stuff from Jeffs and they are very good and you can
trust your getting good gear at an affordable price
With any good pro amp, the sonic quality depends on the input signal's quality. The amp's job is not to make it better or worse.
Before considering a pro amp be sure your electronics have the required configuration to drive it, both in the connections and the output level.
| ||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: