Welcome! Need support, you got it. Or share your ideas and experiences.
64.198.237.148
In Reply to: Busted Ella (Darn- Need Troubleshooting Advice) posted by Saul P on January 24, 2005 at 09:45:39:
Sorry, I omitted a detail.The Ella busted when I was still using the unmodified preamp stage- the foreplay was simply connected to the inputs.
Follow Ups:
OK, maybe you've already done this, but if it was me and without a DVM, I'd be looking for components with burn marks - particularly resistors and diodes.
Ive been checking like mad! Still stumped, though.
Thanks for the info.
I already gave a once-over to the resistors, but not the diodes. I'll double check them. Are there any diodes that are specific to one channel? I kinda thought the power supply was pretty much stereo, so i've ignored it. Could the soft start thing have two channels?Since I got my multimeter, ive checked just about everything I could think of ('cept the PS). None of the coupling caps were at fault, the OPTs look good, the last PS caps on both sides behave the same. AARGH! I'm starting to feel like I've missed something really dumb. Thanks again,
saul
What was the point of using 3uf interstage coupling caps? Don't those need to be kept low for good frequency response? I would double check the caps.Check corresponding voltages for each channel, starting with power supply @ the (2)47k parallel resistors. You should be able to find the trail.
Foreplay not really a good match due to Ellas high sensitivity, alth
Good luck, let us know what you find,
Mark
This post is made possible by the generous support of people like you and our sponsors: