|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
For Sale Ads |
Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.
Original Message
RE: Fostex alnico tweeters
Posted by rickmcinnis@dogwoodfabrics.com on December 11, 2016 at 07:41:36:
I use the T500 in my system which is Edgar architecture but using INLOW horns in the same ranges. Started out with Edgar stuff
I tried many things but ended up being most satisfied with Edgar's recommendation for the FANES (which are pretty annoying). Which is to use nothing more than a capacitor in series.
I use about 0.88 uF of Russian teflons and that is it. No need for padding, you just don't want a resistor in the circuit if you can help it.
Play around with capacitor values and you will find a combo that works. I am using 4 0.22 uF - I would bet that you are better off using one brand/model of capacitor. If you want to sneak up on the right value get a bunch of .1 uF caps.
I had used a 1uF Jupiter copper foil and this was just a bit too much.
Maybe I have grown used to it or my implementation has ameliorated the infamous "ping" sound the FOSTEX tweeters are noted for. Using them purely for atmospherics so they do not impose themselves on the 2441s. I am using the TRUEXTENT diaphragms and these do meld nicely with the T500s - at least I think they do.
One advantage of going ahead and getting the "really good one" is you will not wonder "what if?". Unless you want to drive yourself nuts with wondering what would happen with that TAD supertweeter or a GOTO. Luckily this never crosses my mind.