Home
AudioAsylum Trader
Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

For Sale Ads

FAQ / News / Events

 

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.

You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login


Login to access features only available to registered Asylum Inmates.
    By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username:

The Name that you picked or by default, your email.
Forgot Moniker?

 
 

Examples "Rapper", "Bob W", "joe@aol.com".

Password:    

Forgot Password?

 Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:  
Your Email:  
Subject:  

Message Comments

   

Original Message

(on the cord)

Posted by djk on January 5, 2017 at 13:43:15:

It's in the IEC plug (on the cord).

UK USERS PLEASE READ THIS IMPORTANT SAFETY INFORMAT
ION
Fuse replacement
This appliance is fitted with a non-rewireable 13 A
mp mains plug. The plug
contains a 5 Amp fuse. If the fuse has blown it can
be replaced as follows:
a) Pull out the red fuse cover/carrier.
b) Remove and dispose of the blown fuse.
c) Fit a new 5 Amp BS1362 approved fuse into the car
rier and push the carrier
back into the plug.
Always ensure the fuse cover is fitted. If the fuse
cover is missing do not use the
plug. Contact your Linn retailer to obtain a replac
ement fuse cover.
Fuses are for fire protection and do not protect ag
ainst electric shock.
Mains plug replacement
Should your mains plug need replacing and you are c
ompetent to do this
proceed as follows. If you are in doubt contact you
r Linn retailer or a competent
electrician.
a) Disconnect the plug from the mains supply.
b) Cut off the plug and dispose of it safely. A plug
with bared conductors is
dangerous if engaged in a live socket.
c) Only fit a 13 Amp BS1363A approved plug with a 5
Amp fuse.
d) The cable wire colours or a letter will be marked
at the connection points of
most quality plugs.
Attach the wires securely to their respective point
s. The Brown wire must go to
the Live pin, the Blue wire must go to the Neutral
pin, and the Green/Yellow wire
must go to the Earth pin.
e) Before replacing the plug top ensure that the cab
le restraint is holding the
outer sheath of the cable firmly and that the wires
are correctly connected