Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: It is fascinating posted by Tony Lauck on March 3, 2012 at 21:29:56:
Besides doing the power supplies you can make a big diff by making better ground. Look at ground all around the clock. If there are jumpers make them fat wires or solder another one (insulated) to the pads (on the trace side)to double up the wires. I did this in one unit to lower Jitter! Also, if your unit has disk caps either side of the crystal clock replace them with surface caps of the same value. If your unit has a clock circuit improve the power and ground to it to lower jitter. Good Luck, bobwire
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: It is fascinating - bobwire 08:58:52 03/05/12 (0)