Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

[ Follow Ups ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]
[ Alert Moderator ]

Re: C3g as driver for 300b

Hi,

> but how much current must the c3g draw?

10mA.

> the powerstage is already finisht it is a fixed bias
> stage i wil do 400 volt on the anode and 80ma current

You may find that in this case the C3g will be VERY magrinal to drive the power stage with 1.6V input, unless you add a stepup transformer either after the C3g stage (1:2 stepup interstage transformer) or before (1:2 lineinput- or auto- transformer).

The C3g can swing enough voltage but is a little short of gain.

For your circuit the D3a might be a better choice, with more gain.

Ciao T

This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  

Follow Ups Full Thread
Follow Ups
You can not post to an archived thread.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]