In Reply to: Re: C3g as driver for 300b posted by Thorsten on June 19, 2006 at 02:42:25:
hi Thorsten
thanks you very much for the very detailed information
i will try an ccs then
but how much current must the c3g draw?
i have 2 ccs printcarts from Machmat.com
but they must set on the right currentthe powerstage is already finisht it is a fixed bias stage
i wil do 400 volt on the anode and 80ma current
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: C3g as driver for 300b - horny 09:33:55 06/19/06 (4)
- Re: C3g as driver for 300b - Thorsten 09:45:05 06/19/06 (3)
- Re: C3g as driver for 300b - horny 10:16:44 06/19/06 (2)
- Re: C3g as driver for 300b - Thorsten 10:25:16 06/19/06 (1)
- Re: C3g as driver for 300b - horny 11:35:39 06/19/06 (0)