|
Inmate Central Inmate Central, where civil and family-friendly discourse about off-audio topics (other than religion and politics) is welcome. |
|
|
|
Inmate Central Inmate Central, where civil and family-friendly discourse about off-audio topics (other than religion and politics) is welcome. |
|
In Reply to: Blowing up a JPG and printing it posted by Road Warrior on July 21, 2015 at 10:57:21:
Open the photo then right click it. The pull down menu will appear then click "open with" the Paint apps should appear. The photo will be in the paint by this time.On the Paint upper left menu select "select" button this will allow you to cut Gordon image from the rest by creating a box around him. After creating the box for Gordon right click and select cut.
Open a new file in Paint and then click "paste" from the upper left menu... Voila! Gordon single image should appear. If not repeat the process again. If everything goes well at this point you can also edit the image using the resize and rotate options from the main menu. And don't forget to save it afterwards...
Hope this helps...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- You can use Paint!.... - kootenay 11:28:03 07/21/15 (2)
- I did, it worked and, thanks! ^ - Road Warrior 13:11:13 07/21/15 (1)
- You're welcome!...nt - kootenay 13:15:49 07/21/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
