High-pass filter Laurel

Welborne Labs

Welcome! Need support, you got it. Or share you ideas and experiences.

194.109.166.130

What is the best way to roll of the low frequencies from a Laurel IIx amp? A RC-filter at the input or just decreasing the value of one or both the coupling caps in the amp (see postings below about the effects of the value of the coupling cap on bass response).
I want to build a SS subwoofer for frequencies below 50 Hz to support DIY horns. Maybe the Laurel have more power in reserve when the lowest frequencies (say below 50) are filtered out. Which value is appropiate? I prefer not to use an active cross-over for this purpose of use the filter on the subwoofer amplifier.
Thanks.

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

Topic - High-pass filter Laurel - John S 04:00:41 01/05/01 (3)

Re: High-pass filter Laurel - Ron W. 21:04:10 01/10/01 (1)

Re: High-pass filter Laurel - Calculating R - Chris O 11:01:22 01/19/01 (0)

Re: High-pass filter Laurel - John S. 07:42:30 01/05/01 (0)

You can not post to an archived thread.