In Reply to: fisher tube rectified integrated EL84 amps posted by rockdoc on December 7, 2016 at 13:42:01:
According to the service manual linked below, the early Fisher X101 used 3 12AX7's and 3 7025's. So, essentially 6 12AX7's along with the 7189 outputs and the 5AR4 rectifier. While the X100 uses 4 12AX7's and 2 12DW7's (7247)in the preamp section. The 7247 is a dual triode with each bottle being half a 12AX7 and half a 12AU7 inside. You can search here for posts about the benefits of this. I have no idea if the transformers are the same between the two models or not. I have never heard one of the early x-101's but I do have the X-100...
good luck
--Matt
"When you think everything is someone else's fault, you will suffer a lot."
--Dalai Lama
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: fisher tube rectified integrated EL84 amps - realistico 06:22:29 12/08/16 (3)
- RE: fisher tube rectified integrated EL84 amps - Michael Samra 17:30:09 12/09/16 (0)
- RE: fisher tube rectified integrated EL84 amps - rockdoc 07:05:24 12/08/16 (1)
- IMO&E it is a good idea to use 7189s / EL84Ms to their capacity - Timbo in Oz 20:19:14 12/10/16 (0)