Hi you guys. I have bought a few of gold RCA jacks that I want to put on some vintage gear. I know some of you must of seen those replacement jack sets for the old vintage stuff, the Dynaco PAS 3 set for example. Those jacks are mounted on some sort of fiberglass or epoxy fiberglass. What I'm trying to find is that stuff, whatever it is, so I can make some replacements on some other equipment. I tried plexiglass but it was to hard to drill, it kept cracking on me. All I can say is that it looks like circuit board material that has nothing,(holes,etching )and is completely blank. I'll be the hole driller.
I would appreciate any direction....thanks alot guys...Mark
This post is made possible by the generous support of people like you and our sponsors:
Topic - New Jack Backing - mark.korda@myfairpoint.net 16:31:39 02/29/16 (9)
- RE: I used 1/8 inch hardboard - BigguyinATL 08:48:46 03/02/16 (1)
- RE: I used 1/8 inch hardboard - mark.korda@myfairpoint.net 15:44:08 03/04/16 (0)
- Drilling Plexi - caffeinator 15:23:33 03/01/16 (1)
- RE: Drilling Plexi - mark.korda@myfairpoint.net 17:52:09 03/01/16 (0)
- RE: New Jack Backing - Eli Duttman 19:04:08 02/29/16 (1)
- RE: New Jack Backing - adam@denderapartners.com 07:56:01 03/02/16 (0)
- RE: New Jack Backing - DaveV 17:34:18 02/29/16 (0)
- RE: New Jack Backing - 6bq5 16:59:11 02/29/16 (0)
- RE: New Jack Backing - Douger 16:37:25 02/29/16 (0)