In Reply to: RE: Heater lines posted by Michael Samra on January 13, 2016 at 12:00:03:
There doesn't seem to be a CT for the heater, despite what the schematic shows. I tried adding 200ohm resistors to the heater cables to ground. No effect, so I removed them. I think there is an internal leak in the PT.
Now I wonder about the fact the manufacturer used the unused pins on the 5Y3 rectifier socket as tie points for the heater cables coming out of the PT. Kinda close, causing EMI noise? Probably not, since we have determined the noise is likely in the signal path.
Thanks for suggestions.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Heater lines - PeterI 13:38:32 01/13/16 (3)
- Input lines - FenderLover 18:32:54 01/13/16 (2)
- RE: Input lines - PeterI 10:46:48 01/14/16 (1)
- RE: Input lines - DannyR 12:31:54 01/14/16 (0)