In Reply to: Scott OT rewind posted by onekid on January 4, 2016 at 04:54:17:
I've always wondered if the core of a problem transformer could be submerged in varnish. Then a vacuum drawn on the container holding the varnish with submerged core to pull any air out allowing the varnish to flow into the core to re-coat it. Followed by baking the core at low heat to allow it to cure.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Scott OT rewind - ESDI-80 04:57:06 01/06/16 (0)