|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: Scott 299B Popping after on for a while posted by onekid on September 27, 2015 at 18:04:22:
Go on utube and search for a video on how to retighten tube sockets. Buy a dental pick kit. They are pretty cheap and readily available any CVS. Even super markets carry them.
Also these are most likely the smaller signal tubes. Do a wiggle test on one tube at a time to see if you can replicate the sound. And BINGO that's the socket giving you the trouble.
That should cure the problem.
charles
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Scott 299B Popping after on for a while - airtime 05:50:17 09/28/15 (7)
- RE: Scott 299B Popping after on for a while - onekid 06:32:16 09/28/15 (6)
- RE: Scott 299B Popping after on for a while - airtime 07:03:16 09/28/15 (5)
- Try good contact cleaner, too. - FenderLover 09:51:36 09/28/15 (4)
- RE: Try good contact cleaner, too. - airtime 10:29:36 09/28/15 (3)
- RE: Try good contact cleaner, too. - Crazy Dave 15:11:54 09/28/15 (2)
- RE: Try good contact cleaner, too. - airtime 05:42:40 09/29/15 (1)
- I agree. (nt) - Crazy Dave 07:09:10 09/29/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
