|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: I need your advice and Help posted by nikkofan on April 13, 2015 at 16:02:46:
What you want to do is spray INTO the body of the switch. So you want to look for an opening somewhere. Get the straw as close as you can. Sometimes it is from the top with the cover open, sometimes you have to take off the bottom. Give it a quick spray and work the control many times. Sometimes you will feel the control loosen up a bit. Let it sit for a minute or so then give it a try. It may take another spray or two to get it fully cleaned, but don't turn it on while you have anything 'wet' with the spray.
good luck
--Matt
"When you think everything is someone else's fault, you will suffer a lot."
--Dalai Lama
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: I need your advice and Help - realistico 06:32:40 04/14/15 (2)
- RE: I need your advice and Help - Crazy Dave 07:27:48 04/14/15 (1)
- RE: I need your advice and Help - rickl 06:20:14 04/15/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
