In Reply to: RE: Sorry but I smell BS posted by Russ57 on February 27, 2015 at 14:59:52:
"According to schematic and parts list I found, that 4uF cap is between a GZ34 and choke in the power supply. As long as it isn't plain old bad it wouldn't effect balance in any way. Just check to see if plate voltage on output tubes is close between the two amps."
If the plate voltages on the output tubes were not close
a) would this matter, and
b) what would be the remedy if it did matter?
(The amps are immaculate, for the most part).
Big J
"... only a very few individuals understand as yet that personal salvation is a contradiction in terms."
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Questions form a learner. - jusbe 02:50:06 02/28/15 (7)
- RE: I'll try - Russ57 11:14:23 02/28/15 (6)
- Excellent expaination! (nt) - Crazy Dave 11:55:41 03/02/15 (0)
- I'm saving this incredibly generous post. - jusbe 13:56:22 02/28/15 (4)
- RE: Here you go - Russ57 19:53:23 02/28/15 (1)
- RE: Here you go - jusbe 20:57:40 02/28/15 (0)
- RE: I'm saving this incredibly generous post. - Eli Duttman 14:33:46 02/28/15 (1)
- Good place to start. - jusbe 20:55:55 02/28/15 (0)