|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: RE: Progress - Proof of concept posted by Crazy Dave on December 29, 2014 at 08:31:24:
only "... fine grade of machine oil; that used for sewing machines is suitable."
Pretty certain the manual is available for download from Vinyl Engine. I would suggest you get it because there are only a few points that are oiled, motor bearing [top], spindle bearing, and idler wheel bearing. It adds that the bottom motor bearing only occasionally is oiled.
All the other joints/elbows/etc. are not oiled.
On mine the main gear beneath the spindle seems dirty. I will clean with alcohol and possibly Deoxit.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- It says ... - bjh 18:48:02 12/29/14 (1)
- RE: It says ... - Crazy Dave 10:11:20 01/02/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
