I picked up a nice, complete AR XA today. The main problem with the table is that the foam mat was fused to the platter. I scraped off the foam but what's left is like a pebble finish on the metal. I soaked the outer platter in Goof-Off and let it sit, but it didn't do anything. I took a 3M scouring pad (the non-stick safe one) and it too didn't get off any of the fused foam.
What can I use to get the old foam off? Will rubbing alcohol do a better job than Goof-Off (which I normally use to get sticker residue off of things)?
Thanks,
Chad
This post is made possible by the generous support of people like you and our sponsors:
Topic - Cleaning AR XA Platter - ChadHahn 20:21:16 10/24/14 (5)
- RE: Cleaning AR XA Platter - mark.korda@myfairpoint.net 21:39:13 10/29/14 (0)
- Here is a link with followups for my similar experience . . . - alaskahiatt 21:01:17 10/24/14 (3)
- RE: Here is a link with followups for my similar experience . . . - ChadHahn 22:06:50 10/24/14 (2)
- RE: Here is a link with followups for my similar experience . . . - Brian Levy 06:43:10 10/28/14 (1)
- RE: Here is a link with followups for my similar experience . . . - ChadHahn 07:20:18 10/28/14 (0)