Home Vintage Asylum

Classic gear from yesteryear; vintage audio standing the test of time.

Lamps for Epicure Model One Amp







I'm finally getting around to restoring my Epicure Model One Amplifier. Five of the seven front panel lamps are out. All are IDI Line-o-Lite P/N 3590A48. These are black plastic boxes which snap into holes that measure 1.58" x .725". They have removable front panels with lettering on them. I have not been able to find replacements. I also can't find any specifications on the Chicago Miniature / IDI web site. There are two wire-lead lamps inside the housing. Unless someone knows of a source for the IDI lamp assembly, I'll have to find appropriate wire-lead lamps and solder them into the housings.

The power indicator lamp has 20 VAC across it. One of the overload indicators has 36 VDC across it when the lamp test switch is on. The two remaining good lamps measure 43 ohms and 60 ohms, but I don't know yet if both bulbs are lighting in either housing. Recommendations for replacement bulbs would also be appreciated.

Paul


This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Topic - Lamps for Epicure Model One Amp - satellite65 12:14:36 12/27/12 (3)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.