Vintage Asylum

RE: Titanic Paradigm change

173.66.242.118

In Reply to: RE: Titanic Paradigm change posted by Tadlo on June 15, 2009 at 12:04:32

I've done 4 woofers using this part number from mainelectronics: FSA0605-0440. I think they may have modified the part number, but would be close as the part numbers are the dimensions. It should have an angled inner lip. I used a battery in line with a pot so I can move the cone up and down into the correct position (outer lip flat on frame). I then use bulldog clips all around, five or so, to fix it in position. After pressing up and down several times to ensure no rubbing, I lift and replace each bulldog, continuously glue-ing underneath. Works every time. If you have the spring clip speaker terminal version, you get the back off by carefully prying it up and pulling the back off.

Follow Ups:

RE: Titanic Paradigm change - Tadlo 13:33:44 06/15/09 (2)
- RE: Titanic Paradigm change - lukiedog 16:44:14 06/15/09 (1)
  - Thanks. - Tadlo 17:37:26 06/15/09 (0)

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.