On my Pioneer SX-1250 I have more line level sources than I have inputs... but I have an unused phono2 input. I want to bypass the phono preamp on one of my phono inputs to convert it to a 2nd aux input. I am thinking that I should convert Phono 1, so that I could still use the mic input which Phono 2 goes thru (although I haven't used a mic yet).Anyway, my main question is, if I DeoxIT the mic jack phono switch contacts, should going thru the mic jack alter the response or add noise to the phono input?
Also, am I correct in assuming that I should add 100 ohms in series with the new aux 2 inputs? The aux 1 input has them.
Thanks,
Paul
This post is made possible by the generous support of people like you and our sponsors:
Topic - Bypass phono preamp to get 2nd aux input? - satellite65 21:46:42 05/06/07 (4)
- Reverse RIAA Phono input to line adapter - BarneyT 09:07:22 05/08/07 (1)
- Re: Reverse RIAA Phono input to line adapter - satellite65 10:39:48 05/08/07 (0)
- one more thing... - satellite65 21:54:38 05/06/07 (1)
- Re: one more thing... - Ron Oehlert 07:32:59 05/07/07 (0)