Re: delayed response

Posted by GRH (A) on January 15, 2007 at 10:20:54

In Reply to: Still no picture; the picture does not down load. Also... posted by J. S. Bach on January 12, 2007 at 04:50:05:

I did connect the Yamaha to the Yamaha's at first but the Carver connected to the 801's was doing some funky things at power down (huge thump) so I pulled it out and connected the Yamaha to the 801's. After checking the Carver out independently with no issues I decided it must have been a weird ground loop due to daisy chaining the power cords using rear outlets on the electronics. I put the Carver back in with everything connected directly to a power strip and just hooked the Carver up to the Yamaha's because it was easiest. I do intend to swap things around to see if I get different results.
Gary

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Shootout at the Fantasy Factory circa 1978 (long) - GRH 19:22:07 01/11/07 (5)

Re: 2nd try at Picture - GRH 19:27:52 01/11/07 (4)

No problems for me - castironandtubes 08:03:02 01/13/07 (0)

Still no picture; the picture does not down load. Also... - J. S. Bach 04:50:05 01/12/07 (2)

Re: delayed response - GRH 10:20:54 01/15/07 (0)

It must have been the firewall at work; I was able to view it at home. Nice setup. )MT( - J. S. Bach 21:16:00 01/13/07 (0)

Follow Ups

Re: delayed response - GRH 10:20:54 01/15/07 (0)

You can not post to an archived thread.