In Reply to: Free Mac posted by driver on April 26, 2014 at 11:59:01:
Very nice tuner..Take my advice,do not put in an IEC connector..I just cringe when people do that because not only do you kill the value of the unit,you are creating a weak link.
Get yourself some 16/2 with ground or 14/2 with ground wire from Home Depot and a standard 3 prong plug and solder the cord into the tuner..A wrapped and soldered connection is a hell of a lot better than a slip on that basically causes micro arcing..Then,go to McMaster Carr and get yourself two inductive RF filter clamps and screw them on the cord by where it goes into the amp.
Basically the good IEC cords trap out interference from plasma tvs,computers,I-phones and the list goes on..You are doing the same thing with what I described and you don't devalue your tuner.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Free Mac - Michael Samra 14:52:43 04/27/14 (2)
- OK, all that sounds good - driver 15:47:52 04/27/14 (1)
- RE: OK, all that sounds good - Michael Samra 14:04:09 05/01/14 (0)