question for anyone who's built the Basie

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

I'm at the point of doing the final voltage tests, and I'm not getting anything. No sparks, the LED comes on, but there's no voltage at the points you're supposed to check. All of my wiring looks good, and nothing's touching anything it shouldn't. No cold solder joints. Anyway, I'm pretty sure I've wired the power transformer, IEC, and power switch right according to the ammendments in the instructions, but I'd like some verification. I'm in America, so I wired it for 110V (right?). Please take a look at a drawing of how I've got it wired and let me know if something is wrong. I appreciate it.
http://members.cox.net/trancemitr/
Kevin

Basie power wiring (Open in New Window)

This post is made possible by the generous support of people like you and our sponsors:

McShane Design

Topic - question for anyone who's built the Basie - trancemitr 19:39:14 04/27/02 (2)

Re: question for anyone who's built the Basie - bmar 21:43:43 04/27/02 (1)

That did it. Everything's working. Thanks. (nt) - trancemitr 09:59:23 04/28/02 (0)

You can not post to an archived thread.