In Reply to: Re: Tamura OPT break in posted by iamthanik@hotmail.com on June 19, 2005 at 18:55:45:
>Expenses is not my problem. However, I really hate the bad >charge&recharge habit of Blackgate. Do you have others highend caps >to recommended?
Charge&recharge for these capacitors is secondary. More important, they bring what distortions in a path of signal. Because they stand in a way of signal.There is such concept - an objective reality.
And it in a case with capacitors is such: objectively capacitors BG WKZ sound most better.
And only BG WKZ unique from electrolitic capacitors are at level F5002.
Till 2000 old capacitors ELNA CERAFINE were quite good, but then their manufacture modernized. By the way, during same time with transformers TANGO...>You means that I have to lift the voltage accross the 300B to be >380V, so if voltage drop at cathode is 70V the voltage at plate would >be 70+380=450V, right?
Yes, you have correctly understood. And it is even better to make the fixed displacement, having removed from cathode TJ300B the resistor with capacitor. Then you should not change a voltage of a output stage.
>What is it???This is interstage transformer from Tamura.
Vl
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Tamura OPT break in - VlaUga 14:42:36 06/20/05 (6)
- Re: Tamura OPT break in - iamthanik@hotmail.com 17:57:54 06/20/05 (5)
- P.S. - VlaUga 03:40:48 06/21/05 (0)
- Re: Tamura OPT break in - VlaUga 03:18:18 06/21/05 (3)
- Re: Tamura OPT break in - iamthanik@hotmail.com 04:14:08 06/21/05 (2)
- Re: Tamura OPT break in - VlaUga 14:45:44 06/22/05 (1)
- Re: Tamura OPT break in - iamthanik@hotmail.com 19:24:28 06/22/05 (0)