In Reply to: Help needed: Significant Voltage drop after PS caps posted by banpuku on January 29, 2017 at 09:49:21:
There has to be a short somewhere. If you are testing this with a load, disconnect the load and take your voltages. With no current draw there should be no voltage drop across anything and if there is it should almost be insignificant. Also, make sure your caps are oriented properly(positive to B+/negative to ground) unless you are using non-polarized caps. Then it doesn't matter. But I'm sure if they were oriented improperly the caps would blow up.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Help needed: Significant Voltage drop after PS caps - xaudiomanx 10:48:30 01/29/17 (0)