In Reply to: RE: Opinions please: need recommendations for a Triode driver for a 2a3 posted by dave slagle on January 17, 2017 at 04:59:57:
My pre-amp has 27 db / 17.4V RMS output. The pre-amp also has an internal setting whereby I can reduce the output by 6db if necessary. The pre-amp's manual suggests running the output at the lower output level.
I am open to changing the tube sockets. I desire a single triode (not dual) which implies a 4 pin socket.
I have been using a battery bias on my 6c6 tubes. If possible, I would like to continue to use the battery bias on the new driver tube.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Opinions please: need recommendations for a Triode driver for a 2a3 - banpuku 06:15:32 01/17/17 (1)
- RE: Opinions please: need recommendations for a Triode driver for a 2a3 - tube wrangler 20:42:07 01/18/17 (0)