Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]

---

[ Alert Moderator ]

---

RE: Potentiometer - Volume Pot

Posted by Laudanum (A) on January 5, 2017 at 05:24:32

In Reply to: Potentiometer - Volume Pot posted by sony6060 on January 4, 2017 at 12:09:40:

Are you on a budget?

This probably wont be popular here but ... The Alps conductive plastic pots are readily available. You may have to shorten the shaft and they have pins for thru hole mounting but you can buy or build a board to make wiring easier, or just wire direct. They are only 15 bucks (or 22 bucks at Angela).

http://www.mouser.com/ProductDetail/ALPS/RK27112A00AK/?qs=sGAEpiMZZMtC25l1F4XBUyOcKw5CnqLBt7NWCgOxelA%3d

http://www.angela.com/alpspotentiometerbluevelvet100kstereo.aspx

There is also PEC for about 30 bucks. http://www.digikey.com/product-detail/en/precision-electronics-corporation/KKA1041S28/KKA1041S28-ND/770961

And the TKD for 100 bucks. http://www.partsconnexion.com/tkd_64187.html

Or maybe a Goldpoint stepped attenuator. Already built or build it yourself with one of their switches. http://www.goldpt.com/index.html

This post is made possible by the generous support of people like you and our sponsors:

Amplified Parts

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---