Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]
[ Alert Moderator ]

final report on switching trans vs halo trans for filament supply

Looks like it is going to be the halo trans for me folks. I just like the sound of AC on the 813 filaments better. Clean & pure. The small size of them is a big plus also. I was able to run two 813's off of one of the 30 amp switching trans, but they are larger than the 15 amp units so it is not much help. The fans on the 30 amp units could be problematic as well if the amp is to close to the listening position. They cycle in and out once they warm up, and are a bit noisy. Now all I have to do is try and get one of the 60 watt halo units down to 1.5 volts ac and give that a try on the 26's. The fun never stops ......

This post is made possible by the generous support of people like you and our sponsors:
  Amplified Parts  

Topic - final report on switching trans vs halo trans for filament supply - vinnie2 06:34:16 01/03/17 (25)
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]