RE: CCS Issue

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

RE: CCS Issue

Posted by Paul Joppa (P) on December 27, 2016 at 13:35:20

In Reply to: RE: CCS Issue posted by deafbykhorns on December 26, 2016 at 16:09:29:

Sometimes you need a really high frequency scope (400MHz?) and sometimes you must be very careful to not affect the tube by the measurement. It's very difficult to find intermittent, very high frequency oscillations. The only person I ever knew who had it down was the late John "Buddha" Camille.

I myself have neither the necessary measurement gear nor the expertise, but I have solved problems by installing an appropriate grid stopper, at which point I no longer have to care whether it was oscillation or not. :^)

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - CCS Issue - deafbykhorns 09:20:25 12/26/16 (18)

RE: CCS Issue - Paul Joppa 15:31:18 12/26/16 (10)

RE: CCS Issue - deafbykhorns 16:09:29 12/26/16 (2)

RE: CCS Issue - Paul Joppa 13:35:20 12/27/16 (1)

RE: +1 on gridstopper - deafbykhorns 18:17:03 12/27/16 (0)

6E5P - Maxamillion 15:52:25 12/26/16 (6)

RE: 6E5P - Paul Joppa 13:26:12 12/27/16 (2)

RE: 6E5P - twystd 19:00:28 12/28/16 (1)

RE: 6E5P - Paul Joppa 18:34:52 12/29/16 (0)

RE: 6E5P - deafbykhorns 16:17:42 12/26/16 (2)

RE: 6E5P - Maxamillion 16:36:02 12/26/16 (1)

RE: Magnequest BCP16ni - deafbykhorns 18:12:48 12/26/16 (0)

RE: CCS Issue - Tre' 10:25:56 12/26/16 (5)

RE: IXCP10M90S - deafbykhorns 12:17:29 12/26/16 (4)

RE: IXCP10M90S - Tre' 13:03:54 12/26/16 (3)

RE: IXCP10M90S - LinuxGuru 13:44:45 01/08/17 (0)

RE: IXCP10M90S - deafbykhorns 13:53:33 12/26/16 (1)

RE: IXCP10M90S - PakProtector 10:07:58 01/08/17 (0)

RE: CCS Issue - Chip647 10:21:30 12/26/16 (0)

Follow Ups

RE: CCS Issue - Paul Joppa 13:35:20 12/27/16 (1)

RE: +1 on gridstopper - deafbykhorns 18:17:03 12/27/16 (0)

Post a Message!