In Reply to: Using 230v transformers on 115v primary posted by andy evans on October 21, 2016 at 00:10:23:
If the secondary is 9 volts at 3 amp, running it at 115v you would have 4.5 volts at the same 3 amps. You will lose the voltage but will not increase the amperage rating for the secondary. Just like running your transformer off a VARIAC at half power, it wont hurt anything if you don't pull more than its rating.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Using 230v transformers on 115v primary - Chip647 05:06:22 10/21/16 (1)
- RE: Using 230v transformers on 115v primary - Johno 06:32:19 10/21/16 (0)