|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Hold on a sec posted by Russ57 on September 10, 2016 at 10:42:56:
You stated the transformer was 125-0-125....meaning it has a center tap. Therefore only the last two pics, full wave, NOT the bridge ones apply.>>>>>>
Yes, but if you just treat it as 0-250v and ignore the centre tap, you can then connect it to a bridge, either solid state or I'm suggesting a hybrid bridge with a EZ80 and 2 diodes. Not so?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- See text... - andy evans 11:00:01 09/10/16 (8)
- Yup, not so - Russ57 11:21:04 09/10/16 (7)
- Ah - informative.... - andy evans 12:14:49 09/10/16 (6)
- RE: Ah - informative.... - hennfarm 12:25:13 09/10/16 (5)
- Have the 01A preamp up and running... - andy evans 14:13:17 09/11/16 (4)
- RE: Have the 01A preamp up and running... - euro21 11:03:15 09/14/16 (1)
- Ah - useful info on HT voltage for Gyrator! - andy evans 02:41:01 09/15/16 (0)
- Just curious, would you do a voltage check? - Russ57 18:14:52 09/12/16 (1)
- This is how I wired it - andy evans 12:11:28 09/13/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
