Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]
[ Alert Moderator ]

RE: first try at a 6072a/71a srrp amp...

Opps, drafting error. That connection was made, forgot to draw it in. Where would you expect the grid stop resistor to be? There is a 1k resistor between the grid of the first section of the 6072a and the input, and there is another 1k resistor between the plate of the first section and the cathode of the second that I forgot to label. There is nothing else on Gordon's original schem that I see.
Dang found another error! There is a 10uf cap going from the plate of the second section of the 6072a to ground.


Edits: 08/30/16 08/30/16 08/30/16 08/30/16
This post is made possible by the generous support of people like you and our sponsors:
  McShane Design  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]