|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: The PS is already built posted by drlowmu on August 20, 2016 at 08:11:44:
Hi Jeff to answer your questions
(1) With a certain Line voltage . My wall volts is 120
(1A) what is the VAC at the HV secondary Pt secondary is 450-0-450
(2) What is the value in HY , and DCR of L1 is 5H 38 ohm .4A
L2 is 10H 100 ohm .2A
(3) What is the measured VDC ( B+ ) at C2, B+ is 370
VAC at C2, under load. I dunno what you mean by "under load" but i measured it with all the tubes in after 1 hour I am guessing because i did not note that number. My memory is less than .1 ma
(3A) What IS the total amp load normally, Amp is running 4 6550 @ 82ma in UL + 2 x 6sl7 @ .8ma
3B. it is running where i more or less expected to be, other than i wanted b+ to be around 400vdc.
Thanks for the help, Dak
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: The PS is already built - DAK 09:29:34 08/20/16 (3)
- RE: The PS is already built - drlowmu 10:34:11 08/20/16 (2)
- RE: - DAK 12:57:22 08/20/16 (1)
- Pins 4 or 6 - drlowmu 13:22:14 08/20/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
