Ripple at 2mv scale on second stage on Rx1 as all readings were taken.Ripple check on the 2mv scale.
" This is at the 5mv scale which is essentially nothing..This doesn't have a film cap supply but is has black gates for the main filters and I did put a 35uf film in the downstream that feeds the EF86 and 12BH7 which are used in the power supply. Keep in mind when you have a regulator that has has gain,it will also multiply the effective capacitance and in a preamp,that says a lot as they don't draw what an amp does in current.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Topic - Airtight preamp ripple test. - Michael Samra 17:51:32 08/14/16 (7)
- RE: Airtight preamp ripple test. - lovetube 01:09:08 08/15/16 (1)
- RE: Airtight preamp ripple test. - Michael Samra 02:28:15 08/15/16 (0)
- RE: Airtight preamp ripple test. - megasat16 22:48:00 08/14/16 (4)
- To me, that scope waveform seems like noise picked up by probe lead than the ripple - Michael Samra 02:26:54 08/15/16 (3)
- RE: To me, that scope waveform seems like noise picked up by probe lead than the ripple - lovetube 03:03:41 08/15/16 (2)
- RE: To me, that scope waveform seems like noise picked up by probe lead than the ripple - Eli Duttman 12:59:05 08/15/16 (1)
- RE: To me, that scope waveform seems like noise picked up by probe lead than the ripple - Michael Samra 20:36:08 08/15/16 (0)