ESR is 1.1 ohmsLeakage current is minus 1.4 microamps which is below 0Dielectric absorption is 0% which is tops.This is a 51uf Solen poly and it reads exactly 51.3ufLeakage current is 5.2 microamps,not milliamps which very lowdielectric absorption is 0% which is expected.The ESR is 1.16 ohmsThis is a 70uf Panasonic film cap and it reads exactly 70ufLeakage is about 3ma which is very good for this 820uf lytic large value capESR is 1.14 ohms which is really good as wellDielectric absorption is at 8% which is dam good for a lytic.This first cap is the Panasonic 820uf CE.It reads 716uf which is actually well within tolerance of 20% which this reading around 12% or so.
The tests I am going to show you are tested on my Sencore LC-102 and it shows the most critical aspects from ESR,dielectric absorption,leakage by current and internal resistance.I picked my favorite to two of my many favorite film caps.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
Edits: 07/23/16
This post is made possible by the generous support of people like you and our sponsors:
Topic - Capacitor tests,electrolytics vs film caps.Scroll to the bottom and read up. - Michael Samra 13:52:45 07/23/16 (5)
- 70uF Film Cap - Triode_Kingdom 15:18:15 07/23/16 (2)
- LOOK AGAIN! - Michael Samra 15:54:58 07/23/16 (1)
- RE: LOOK AGAIN! - Triode_Kingdom 20:13:11 07/23/16 (0)
- Conclusions/insights?... - Steve O 14:53:37 07/23/16 (1)
- RE: Conclusions/insights?... - Michael Samra 15:56:05 07/23/16 (0)