|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Russ brought up a good point about coax posted by Chip647 on July 3, 2016 at 10:00:40:
Where you attach a shield to the ground only makes a difference if you have a high resistance in your ground return. I would solve that problem first.
The point is you only want to attach the shield on one end,not both.If you look at the old tuners,they also leave shield open at the input signal end and attach it to the chassis at the opposite end.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Russ brought up a good point about coax - Michael Samra 12:56:14 07/03/16 (2)
- RE: Russ brought up a good point about coax - Chip647 13:20:05 07/04/16 (1)
- RE: Russ brought up a good point about coax - Michael Samra 14:11:08 07/06/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
