In Reply to: RE: Here are the readings of chokes I got on my LC-102 posted by Lew on June 24, 2016 at 11:10:38:
For a given inductance, the relationship between frequency and reactance would be linear. What I wonder is what voltage and current are applied by the Sencore to achieve a reading for inductance and whether those unknown parameters could be causing an artifactually low reading for L.
What about the fact that the 320mh chokes read higher than the rated value? Either the chokes aren't consistent with their specified values or they are tested at a specified voltage and current or frequency to achieve their stated value.I can measure the voltage and current out of the sencore.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Here are the readings of chokes I got on my LC-102 - Michael Samra 13:00:18 06/24/16 (1)
- DC Current Needed - Triode_Kingdom 18:54:34 06/24/16 (0)